‘Sizzix’ Category

  1. Creepy Clipboard

    2nd September, 2019 by iGirlZoe

    iGirlZoe: Tim Holtz Creepy Clipbpard

    Hello friends. Things are about to get really freaky around here with Halloween making full steam ahead. Meet the bone collector… no you really wouldn’t want to!

    iGirlZoe: Tim Holtz Creepy Clipbpard
    Using the new Tim Holtz halloween idea-ology, I created this creepy altered clipboard.

    iGirlZoe: Tim Holtz Creepy Clipbpard
    I love crackle anything and use opaque crackle texture paste from Ranger a lot. As you will see from the photo above, the issue I have had in the past is the paste flakes off once it dries and cracks.

    iGirlZoe: Tim Holtz Creepy Clipbpard
    This time I added a layer of vintage distress collage medium over the top. Some of the crackle paste flaked off and moved as I painted on the vintage medium, but I just pushed it into place with my finger. What I was left with was a really organic looking cracked background. Once dry, I rubbed distress crayons into the cracks with my finger.

    iGirlZoe: Tim Holtz Creepy Clipbpard
    I grunged up the clipboard clip with distress grit-paste, distress paint and distress crayons. Added the cool skull and crossbones which has been resized this year and comes as part of the adornments halloween accents. As well as a word band from the adornements halloween words set and hardware heads covered with distress crayon, I wrapped wire around the skull and crossbones, boneyard bone and hitch fasteners that I used to attach the clip.

    iGirlZoe: Tim Holtz Creepy Clipbpard
    I am a bit obsessed with the new cobweb dies from the Sizzix frightful things thinlits die set. I ran it through my sidekick with distress mixed media heavystock, sprayed with ground espresso distress spray and once dry, shaped with my fingers to give it some dimension and glued the edges allowing the center to still be popped up.

    iGirlZoe: Tim Holtz Creepy Clipbpard
    The stitched thinlits dies make the best frames. I used 2 sized ovals die cut from heavystock, covered with opaque crackle texture paste. I’m pretty impatient so I used my heat tool to speed up the drying and allowed the heat to sit over parts of the paste so it bubbled. You get a really nice gnarly effect which I covered with distress crayons.

    iGirlZoe: Tim Holtz Creepy Clipbpard
    I had a tiny piece of leftover idea-ology ruler ribbon which I added remnant rubs to the back of, inked, covered with a layer of vintage distress collage medium and stitched with orange thread. That gorgeous background paper is from the utterly amazing abandoned paper stash! Stock up!

    iGirlZoe: Tim Holtz Creepy Clipbpard
    The new idea-ology adornment spider reminded me of the face huggers from the Alien movies. I removed the pearl and wired an idea-ology tiny vial to it. I glued some idea-0logy boneyard bones inside the vial and a label from the ephemera pack with remnant rubs added.

    iGirlZoe: Tim Holtz Creepy Clipbpard
    Thanks for stopping by. Hope you find time to get your creep on…

    If you would like to see a step out of the crackle paste technique, head over to Tami B – playswellwithpaper blog. And while you’re there, do yourself a favour and check out her most incredible candle tutorial. Trust me, you don’t want to miss them.

    Zoe


  2. Meanwhile over on Instagram

    14th August, 2019 by iGirlZoe

    igirlzoe: Meanwhile over on Instagram

    Hello friends! It’s been a while… I’ve been sharing my makes over on instagram rather than my blog recently as, honestly, it’s easier and I’m quite lazy! LOL
    I’m aware that not everybody uses instagram and so for those who don’t, I’m posting a catch up of what I’ve been making since my last blog post…

    iGirlZoe: Tim Holtz, stampers anonymous, sizzix, idea-ology, ranger ink, distress oxides, distress archival ink
    (CMS371) distinguished + (CMS304) sea life + idea-ology snarky sticker

    iGirlZoe: Tim Holtz, stampers anonymous, sizzix, idea-ology, ranger ink, distress oxides, distress archival ink
    (CMS375) inventor 8 + lattice trim 3D impresslits + idea-ology hardware heads, story stick, quote chip, design tape

    iGirlZoe: Tim Holtz, stampers anonymous, sizzix, idea-ology, ranger ink, distress oxides, distress archival ink
    (CMS373) the professor + (CMS368) fragments + alphanumeric label thinlits die + idea-ology hardware heads, quote chip, adornment arrow, story stick, gears

    iGirlZoe: Tim Holtz, stampers anonymous, sizzix, idea-ology, ranger ink, distress oxides, distress archival ink
    destination thinlits die + alphanumeric label thinlits die + idea-ology ephemera, design tape, hardware heads

    iGirlZoe: Tim Holtz, stampers anonymous, sizzix, idea-ology, ranger ink, distress oxides, distress archival ink
    (CMS371) distinguished + (CMS237) crazy things + crochet thinlits die +alphanumeric label thinlits die

    iGirlZoe: Tim Holtz, stampers anonymous, sizzix, idea-ology, ranger ink, distress oxides, distress archival ink
    destination thinlits die + alphanumeric label thinlits die + idea-ology ephemera, design tape

    iGirlZoe: Tim Holtz, stampers anonymous, sizzix, idea-ology, ranger ink, distress oxides, distress archival ink
    intricate lace thinlits die + lumber 3D + stitched ovals thinlits die + entomology framelits die + (CMS328) entomology +idea-ology hardware heads, design tape

    iGirlZoe: Tim Holtz, stampers anonymous, sizzix, idea-ology, ranger ink, distress oxides, distress archival ink
    (CMS301) noble gent + gearhead thinlits die

    iGirlZoe: Tim Holtz, stampers anonymous, sizzix, idea-ology, ranger ink, distress oxides, distress archival ink
    (CMS373) the professor + (CMS302) etcetera + idea-ology quote chip, filmstrip

    iGirlZoe: Tim Holtz, stampers anonymous, sizzix, idea-ology, ranger ink, distress oxides, distress archival ink
    (CMS373) the professor + idea-ology story stick, hitch fastener, classic label stickers, remnant rubs, snarky stickers

    iGirlZoe: Tim Holtz, stampers anonymous, sizzix, idea-ology, ranger ink, distress oxides, distress archival ink
    (CMS373) the professor + (CMS074) the big top + (THS003) rays stencil

    Thanks for stopping by and please let me know if you have any questions.

    Zoe


  3. 304

    14th March, 2019 by iGirlZoe

    iGirlZoe: Tim Holtz, stampers anonymous, distinguished stamps, ideaology, steampunk, dapper, stamps, mixed media, gel press, card

    Hello Friends. I’m back with another card using the new Tim Holtz Stampers Anonymous stamps, this time using Distinguished (CMS371) and Fragments (CMS368) sets. I am sharing these cards on instagram and facebook, but continue to post on my blog for those of you who don’t use social media and to include some additional detail for those who would like it.

    iGirlZoe: Tim Holtz, stampers anonymous, distinguished stamps, ideaology, steampunk, dapper, stamps, mixed media, gel press, card
    I created the background using a gel press and distress paints in evergreen bough, iced spruce and frayed burlap. Then stamped one of the stamps from the fragment (CMS368) sets in vintage photo distress archival ink.

    Thanks to a question from my friend Tera, I have included how I use the gel press with distress paints to create backgrounds. There are lots of far more detailed instructions out there and I am very much a beginner, but if it helps, it’s below…

    iGirlZoe: Tim Holtz, stampers anonymous, distinguished stamps, ideaology, steampunk, dapper, stamps, mixed media, gel press, card
    I used a 5×7 inch gel press, a brayer, distress paints and distress mixed media heavystock. Put a couple of drops of distress paint on the gel press and roll the brayer back and forth over to spread the paint. Lay a piece of distress mixed media heavystock over the gel press and rub the back of the cardstock and peel off. Repeat using a variety of colours of distress paint, until happy with the result.

    iGirlZoe: Tim Holtz, stampers anonymous, distinguished stamps, ideaology, steampunk, dapper, stamps, mixed media, gel press, card
    I stamped the traditional hat and coat/collar from the new distinguished set and this time stamping and fussy cutting one of the new collars, which fit perfectly over the top of the bow tie. I added some snarky small talk stickers and design tape. Confession, the design tape was to cover up small tear. Design tape covers all! 😉

    iGirlZoe: Tim Holtz, stampers anonymous, distinguished stamps, ideaology, steampunk, dapper, stamps, mixed media, gel press, card
    The frame is die cut with the stitched rectangles and run through with the lumbar 3D texture fades folder. Blending in walnut stain distress ink with a blending tool and mounting over the background with adhesive foam.

    iGirlZoe: Tim Holtz, stampers anonymous, distinguished stamps, ideaology, steampunk, dapper, stamps, mixed media, gel press, card
    I also added some numbers from the typography set and piece of broken ruler leftover from another project. I added a wash of mushroom alcohol ink over the top of the numbers. I like to add meaning to my cards, even if sometimes hidden in plain sight.

    iGirlZoe: Tim Holtz, stampers anonymous, distinguished stamps, ideaology, steampunk, dapper, stamps, mixed media, gel press, card
    304 is a significant number that I know a few of my friends will get… maybe. Hopefully. 😉

    Zoe

     



  4. Just Breathe

    13th March, 2019 by iGirlZoe

    iGirlZoe: Tim Holtz, stampers anonymous, distinguished stamps, ideaology, steampunk, dapper, entomology, stamps, mixed media, card

    Hello friends. Still clinging slightly too tightly to The Professor (CMS373) stamp set, I made a card also using another of my other fave sets from the March stamp release, Distinguished (CMS371).

    iGirlZoe: Tim Holtz, stampers anonymous, distinguished stamps, ideaology, steampunk, dapper, entomology, stamps, mixed media, card
    The new wardrobe is dreamy and I stamped and fussy cut the traditional hat and coat-collar. It works beautifully over the lightbulb stamp from The Professor (CMS373) stamp set. That Lightbulb though… OH MY! <3

    iGirlZoe: Tim Holtz, stampers anonymous, distinguished stamps, ideaology, steampunk, dapper, entomology, stamps, mixed media, card
    “like moths to a flame” (I couldn’t help myself), I was drawn back to the entomology (CMS328) stamp set and with the accompanying thinlits die set, it couldn’t be easier, especially as it fits through my sidekick, too easy not to!! Love my sidekick.

    iGirlZoe: Tim Holtz, stampers anonymous, distinguished stamps, ideaology, steampunk, dapper, entomology, stamps, mixed media, card
    The snarky stickers are so so good. I’m going to use them more on my cards. These are from the original snarky small talk set. They’re mounted onto a piece of ruler leftover from another project. Keep those bits to use up later, it’s fun sifting through your bit box and it can often give you some unexpected inspiration.

    iGirlZoe: Tim Holtz, stampers anonymous, distinguished stamps, ideaology, steampunk, dapper, entomology, stamps, mixed media, card
    I used a frame from my bit box that I had cut from metallic kraft stock, die cut with stitched rectangles thinlits die and embossed with the foundry 3D texture fades folder. I simply added alcohol ink to it and adhered with adhesive foam. I used the text stamp from the entomology (CMS328) set over the background, as well as the advert stamp from the distinguished (CMS371) set, love this stamp a lot! Stamped in hickory smoke and vintage photo distress archival ink.

    Thanks for stopping by. Hope you get some time to be creative this week.

    Zoe

     



  5. The Professor

    12th March, 2019 by iGirlZoe

    iGirlZoe: Tim Holtz, stampers anonymous, the professor, inventor, mail art, stamps, ideaology, steampunk, stamps, mixed media, card

    Hello friends. I wanted to share the details of 4 cards that I made using the new The Professor (CMS373) stamp set from Tim Holtz and Stampers Anonymous.

    iGirlZoe: Tim Holtz, stampers anonymous, the professor, inventor, mail art, stamps, ideaology, steampunk, stamps, mixed media, card
    I used a gel press with distress paints to create the background and stenciled through the crate stencil with more distress paint and a blending tool. Stamping the awesome new inventor 7 (CMS374) stamps in ground epsresso distress archival ink.

    iGirlZoe: Tim Holtz, stampers anonymous, the professor, inventor, mail art, stamps, ideaology, steampunk, stamps, mixed media, card
    I used these mail art stamps (CMS339) released last year to create my own sentiments. Both stamped in black soot distress archival ink and idea-ology adornment arrow, adornments star and a gear were added with a little distress collage medium.

    iGirlZoe: Tim Holtz, stampers anonymous, the professor, inventor, mail art, stamps, ideaology, steampunk, stamps, mixed media, card
    I stamped and fussy cut the professor from distress watercolor cardstock and added to the card with adhesive foam to give it some lift. I blended in a little frayed burlap distress ink in.

    iGirlZoe: Tim Holtz, stampers anonymous, the professor, inventor, mail art, stamps, ideaology, steampunk, stamps, mixed media, card
    This background was rescued from the scrap pile. I created it using fired brick oxide spray and then painted distress collage medium over the top. I sanded back portions and blended in vintage photo distress ink. Adding a stamped and fussy cut professor from the professor (CMS373) stamp set.

    iGirlZoe: Tim Holtz, stampers anonymous, the professor, inventor, mail art, stamps, ideaology, steampunk, stamps, mixed media, card
    I added idea-0logy nibs, quote tokens and a number 9 from the numeric set which I painted with candied apple distress paint and rubbed to weather.

    iGirlZoe: Tim Holtz, stampers anonymous, the professor, inventor, mail art, stamps, ideaology, steampunk, stamps, mixed media, card
    Using the mail art (CMS339) stamp set again, I created a border for the bottom of the card. I painted using frayed burlap oxide ink. I added a piece of idea-ology filmstrip over the stamped measure tape from the professor set and added some of the new idea-ology hardware heads. I wish wish wish these were sold in bulk packs, I LOVE them.

    iGirlZoe: Tim Holtz, stampers anonymous, the professor, inventor, mail art, stamps, ideaology, steampunk, stamps, mixed media, card
    This next card was inspired by the talented Joy Kennedy who created a beautiful sample for Tim’s booth at this years Creativation. You can see her sample HERE.

    I created the background using a gel press and distress paints. Stamping with a stamp from the fragments (CMS368) stamp set in vintage photo distress archival ink.

    iGirlZoe: Tim Holtz, stampers anonymous, the professor, inventor, mail art, stamps, ideaology, steampunk, stamps, mixed media, card
    I added lots of idea-ology including, ribbon ruler, numeric, adornment arrows, philosophy tags, milk caps, index clips and adorment stars, all adhered with distress collage medium.

    iGirlZoe: Tim Holtz, stampers anonymous, the professor, inventor, mail art, stamps, ideaology, steampunk, stamps, mixed media, card
    I stamped the cool advert stamp from the new distinguished (CMS371) stamp set. The travel stamp platform was a godsend in this case as the print didn’t come out as bold as I wanted the first time so I kept stamping until I was happy.

    iGirlZoe: Tim Holtz, stampers anonymous, the professor, inventor, mail art, stamps, ideaology, steampunk, stamps, mixed media, card
    I dipped into my bits box and found these die cut gears from the industrial bigz die, cut from metallic kraft stock. I added vintage photo distress crayon to grunge them up. Layered under a fussy cut professor and mounted over the top of the stamped inventor 7 (CMS374) stamp set in faded jeans distress archival ink.

    iGirlZoe: Tim Holtz, stampers anonymous, the professor, inventor, mail art, stamps, ideaology, steampunk, stamps, mixed media, card
    I addded a fuse and more idea-ology hardware heads. Obsessed!!

    iGirlZoe: Tim Holtz, stampers anonymous, the professor, inventor, mail art, stamps, ideaology, steampunk, stamps, mixed media, card
    Finally I added a quote chip of one of my favourite words.
    They say that curiosity makes you smarter…

    iGirlZoe: Tim Holtz, stampers anonymous, the professor, inventor, mail art, stamps, ideaology, steampunk, stamps, mixed media, card
    Thanks for stopping by. Hope this post has inspired you to make something.
    The Professor, Inventor 7 and Distinguised stamp sets are all available this month.

    Zoe

     



  6. Ice Flake Baby!

    5th December, 2018 by iGirlZoe

    Hello friends! I’m back with another Christmas card. I’m pretty sure that I am way behind schedule at this stage, but the fun I am having creating holiday cards in the correct season, makes up for the late nights and sheer panic that await me… at some point I must start my Christmas shopping! *insert hysterical laughter*

    iGirlZoe: Tim Holtz, sizzix, ice flake bigz die, stampers anonymous, music and advert stamps, ornate trims, idea-ology, gumdrop, metallic kraft stock, holidays, christmas card
    As soon as Tim Holtz announced his holiday dies, the ice flake bigz die went to the top of my MUST HAVE list.

    iGirlZoe: Tim Holtz, sizzix, ice flake bigz die, stampers anonymous, music and advert stamps, ornate trims, idea-ology, gumdrop, metallic kraft stock, holidays, christmas card
    Glue metallic kraft stock to distress mixed media heavystock and die cut using the ice flake bigz die.

    iGirlZoe: Tim Holtz, sizzix, ice flake bigz die, stampers anonymous, music and advert stamps, ornate trims, idea-ology, gumdrop, metallic kraft stock, holidays, christmas card
    Using the sanding grip, sand parts of the ice flake and blend in vintage photo distress ink. I love that the metallic kraft stock can be so grungy with a little light sanding.

    iGirlZoe: Tim Holtz, sizzix, ice flake bigz die, stampers anonymous, music and advert stamps, ornate trims, idea-ology, gumdrop, metallic kraft stock, holidays, christmas card
    Attach to the card at the center of the ice flake with distress collage medium and add an idea-ology gumdrop coloured with mushroom alcohol ink.

    iGirlZoe: Tim Holtz, sizzix, ice flake bigz die, stampers anonymous, music and advert stamps, ornate trims, idea-ology, gumdrop, metallic kraft stock, holidays, christmas card
    Using Tim Holtz stamps, stamp the advert from music and advert set (cms358) onto heavystock using archival ink. Drag through a wash of frayed burlap, iced spruce and pumice stone distress spray. Use an ornate trims stamp (cms326) to create a border for the the greeting, stamped from the yuletide set (cms356).

    iGirlZoe: Tim Holtz, sizzix, ice flake bigz die, stampers anonymous, music and advert stamps, ornate trims, idea-ology, gumdrop, metallic kraft stock, holidays, christmas card
    Layer onto more metallic kraft stock and classic kraft stock, lightly sand and blend in vintage photo distress ink.

    iGirlZoe: Tim Holtz, sizzix, ice flake bigz die, stampers anonymous, music and advert stamps, ornate trims, idea-ology, gumdrop, metallic kraft stock, holidays, christmas card
    Another card to add to my stack.

    Zoe x

     



  7. Tick Tock Christmas O’Clock

    3rd December, 2018 by iGirlZoe

    I don’t want to freak anyone out, but we’re 3 days into December! Just going to leave that there…

    I find it difficult to skip the details when using Tim Holtz products. They work so perfectly together that it’s easy to get carried away, even when time isn’t on your side. That said, having the right tools makes even the more detailed cards, short work. Tools such as the travel stamp platform, sidekick and glitter duster make it easy to work quickly and in batches.

    iGirlZoe: Tim Holtz, stampers anonymous, inventor, stamps, inventor 1, idea-ology, clock hands, stamptember, sizzix, funky festive, festive greens, glitter duster, holidays, christmas card
    I reached for the inventor stamps again, this time going back to the beginning and using Inventor 1 set. I saw a clock adorned with fresh foliage at a garden center a few weeks ago and immediately the inventor clock came to mind.

    iGirlZoe: Tim Holtz, stampers anonymous, inventor, stamps, inventor 1, idea-ology, clock hands, stamptember, sizzix, funky festive, festive greens, glitter duster, holidays, christmas card
    Using the travel stamp plaform, ink and stamp the clock only. Slide the heavystock down the stamp platform and ink and stamp the header text onto the top of the heavystock! This is why I LOVE the stamp platform. I stamped a music strip and Christmas greeting onto heavystock with stamps from the Tim Holtz Stamptember 2018 stamp set. Stamping a second clock and fussy cutting a portion to stick over the original stamped image to give a little dimension.

    iGirlZoe: Tim Holtz, stampers anonymous, inventor, stamps, inventor 1, idea-ology, clock hands, stamptember, sizzix, funky festive, festive greens, glitter duster, holidays, christmas card
    Paint idea-ology clock hands with candied apple distress paint, rubbing some of the paint off to create a weathered look. Attach to the clock with idea-ology hex fasteners.

    iGirlZoe: Tim Holtz, stampers anonymous, inventor, stamps, inventor 1, idea-ology, clock hands, stamptember, sizzix, funky festive, festive greens, glitter duster, holidays, christmas card
    The foliage is cut from the funky festive thinlits die set from classic kraft stock using the sidekick. The bow I used is from last years festive greens thinlits die set. I love this bow! It was all given the glitter duster treatment. I LOVE this new tool because it gives you such a fine layer of glitter. Check out Tim Holtz blog post to see it in action.

    iGirlZoe: Tim Holtz, stampers anonymous, inventor, stamps, inventor 1, idea-ology, clock hands, stamptember, sizzix, funky festive, festive greens, glitter duster, holidays, christmas card
    I stitched the edges with my sewing machine. I was especially pleased with how straight my stitching was on this card. It’s blind luck, because 2 cards later the stitching was wonky and off the edge… LOL I try!

    iGirlZoe: Tim Holtz, stampers anonymous, inventor, stamps, inventor 1, idea-ology, clock hands, stamptember, sizzix, funky festive, festive greens, glitter duster, holidays, christmas card
    Thanks for stopping by.

    Zoe x

     



  8. Holiday idea-ology Table Decoration

    29th November, 2018 by iGirlZoe

    Christmas is coming and it’s time to think about decking the halls. I was inspired by the wonderful new Tim Holtz holiday idea-ology to make a holiday table decoration.

    iGirlZoe: Tim Holtz, idea-ology, holidays, christmas, sizzix, tree ring bigz die, woodlands trees, decorative deer
    Living in Denmark for the past couple of years, I wanted to add a little Scandi style to my Christmas decorations. The woodland theme is popular here, so the tree ring die was perfect and that’s where I began…

    iGirlZoe: Tim Holtz, idea-ology, holidays, christmas, sizzix, tree ring bigz die, woodlands trees, decorative deer
    To make a dimensional base, I upcycled some shipping boxes I had amassed during a lot little black friday sale shopping!

    Step 1: Die cut slices of tree ring from the shipping boxes and glue them together using distress collage medium.
    Step 2: Die cut one piece from distress mixed media heavystock, (this is the piece you’ll emboss, using the matching texture fades folder that accompanies the tree ring die). Blend in vintage photo distress ink and adhere onto the top of the stack.
    Step 3: Using a finger, spread distress grit paste onto the side to hide the layers of corrugated cardboard packaging, wiping any grit paste off the top surface and set aside to dry.
    Step 4: Paint the side and top outer tree ring with ground espresso distress paint and set aside to dry.

    iGirlZoe: Tim Holtz, idea-ology, holidays, christmas, sizzix, tree ring bigz die, woodlands trees, decorative deer
    Using a Stampers Anonymous Splatbox, spray a mini, small and large woodlands tree with peeled paint distress spray.

    iGirlZoe: Tim Holtz, idea-ology, holidays, christmas, sizzix, tree ring bigz die, woodlands trees, decorative deer
    Brush distress collage medium over the trees with your finger and sprinkle over distress rock candy glitter. If you use the new glitter duster that was recently released by Stampers Anonymous, you get a much finer layer of glitter than pictured here.

    iGirlZoe: Tim Holtz, idea-ology, holidays, christmas, sizzix, tree ring bigz die, woodlands trees, decorative deer
    Paint a small and large idea-ology decorative deer with gathered twigs distress paint and once completely dry, add circles with antique linen distress paint.

    iGirlZoe: Tim Holtz, idea-ology, holidays, christmas, sizzix, tree ring bigz die, woodlands trees, decorative deer
    Die cut a bow and word from Tim Holtz thinlits handwritten holidays and fold-up bows thinlits dies, from idea-ology classic kraft stock. Adhere everything to the base using distress collage medium (a little goes a long way and it dries in seconds).

    iGirlZoe: Tim Holtz, idea-ology, holidays, christmas, sizzix, tree ring bigz die, woodlands trees, decorative deer
    There are so many options with this decoration. You could add an idea-ology memo pin with a name and use it as place-card holder. You could leave off the “believe” die cut and put an electric tea light in the front. You could also add a bent word band to the front. I will be making some more for my family Christmas table and will share them on my instagram.

    iGirlZoe: Tim Holtz, idea-ology, holidays, christmas, sizzix, tree ring bigz die, woodlands trees, decorative deer

    iGirlZoe: Tim Holtz, idea-ology, holidays, christmas, sizzix, tree ring bigz die, woodlands trees, decorative deerThanks for stopping by and I hope that this has inspired you to make something for the holidays. You can see all of Tim Holtz holiday idea-ology products on Tim’s blog.

    Zoe

     



  9. Wicked and Co

    9th October, 2018 by iGirlZoe

    Hello everyone. I hope you are enjoying October and all the wonderful things it brings. This is my favourite time of year and love decorating my home for Autumn and Halloween. This year I am trying to make Halloween decorations to match my home decor and I wanted to share a piece I made using the new Tim Holtz Halloween idea-ology and etcetera tag with tombstone overlay.

    iGirlZoe: Tim Holtz, etcetera tombstone overlay, 3D lumber texture fades, idea-ology, sizzix, stampers anonymous, ranger ink, mixed media, halloween, witches, skulls, paper dollsI was inspired by a new gothic and gripping British TV series, “A Discovery of witches,” which I believe is going to air in the US in January. Much of the series so far has been set at Oxford University and specifically in the library. With lots of wood and old style architecture, it was perfect inspiration to match my craft living room, which has lots of dark wood and an old library feel.

    iGirlZoe: Tim Holtz, etcetera tombstone overlay, 3D lumber texture fades, idea-ology, sizzix, stampers anonymous, ranger ink, mixed media, halloween, witches, skulls, paper dolls
    If you have used an etcetera tag before, you will recognise the tag, (on the left) and the tombstone overlays are on the right. Having them in pieces makes life so much easier when covering with paper or decorating. I marked where the overlays would sit with a pencil. *the torn parts are where I used double sided tape to plan my tag.

    iGirlZoe: Tim Holtz, etcetera tombstone overlay, 3D lumber texture fades, idea-ology, sizzix, stampers anonymous, ranger ink, mixed media, halloween, witches, skulls, paper dolls
    Emboss 3 pieces of distress mixed media heavystock using the Tim Holtz 3D lumber texture fades folder. Spray distress spray onto a glass media mat and drag the heavystock through. Once dry, blend in vintage photo and walnut stain distress ink. Next, trace around the overlay on the back of the heavystock. Use the inside of the overlay as a template to trace onto paper from the halloween paper stash. Cut out and adhere onto the overlays using distress collage medium. Cut heavystock with the tangled twigs thinlits die, emboss with the 3D lumber texture fades folder and blend in vintage photo and walnut stain distress ink. Trim to fit the overlay and adhere just at the edges so the tangled twigs float slightly above the background paper from the halloween paper stash.

    iGirlZoe: Tim Holtz, etcetera tombstone overlay, 3D lumber texture fades, idea-ology, sizzix, stampers anonymous, ranger ink, mixed media, halloween, witches, skulls, paper dolls
    Adhere the overlay over the top with distress collage medium and place under something heavy to press, like a pupmkin casserole dish… lol

    iGirlZoe: Tim Holtz, etcetera tombstone overlay, 3D lumber texture fades, idea-ology, sizzix, stampers anonymous, ranger ink, mixed media, halloween, witches, skulls, paper dolls
    Adhere the lumber embossed heavystock to the tag just overlapping the pencil lines marked out earlier, trimming to fit. Adhere the tombstone overlays to the tag with distress collage medium. Once completely dry, blend in walnut stain distress ink around the edges of the tag and overlay, using a mini blending tool.

    iGirlZoe: Tim Holtz, etcetera tombstone overlay, 3D lumber texture fades, idea-ology, sizzix, stampers anonymous, ranger ink, mixed media, halloween, witches, skulls, paper dolls
    Decorate the tombstone with idea-ology. Add an adornment from the milagros set to the top of the overlay and a halloween word band, altered with picket fence distress paint and mushroom alcohol ink. Adhere heavystock to adhesive foam and die cut using the alphanumeric thinlits die. Add distress paint and when almost dry, rub with a dry cloth to give a weathered look. Add idea-ology skulls to the top of the vignette frame (detailed below)…

    iGirlZoe: Tim Holtz, etcetera tombstone overlay, 3D lumber texture fades, idea-ology, sizzix, stampers anonymous, ranger ink, mixed media, halloween, witches, skulls, paper dolls
    Cover an idea-ology vignette frame with rusty hinge distress paint and set aside to dry. Repeat using black soot distress paint, allowing to almost dry and rubbing gently with a dry cloth to expose tiny portions of the rusty hinge layer. Once completely dry, dry brush fossilized amber distress paint over parts of the frame.

    iGirlZoe: Tim Holtz, etcetera tombstone overlay, 3D lumber texture fades, idea-ology, sizzix, stampers anonymous, ranger ink, mixed media, halloween, witches, skulls, paper dolls
    Create the same underlay, of tangled twigs die cut and halloween paper stash, to create a base for the frame. Tuck in witches from the paper dolls ancestors, (so pleased the witches are back again). Use distress markers to colour parts of the paper dolls and allow to air dry before lightly rubbing with a cotton bud. Add a little flair to the hat with dyed mummy cloth, ribbon or twine. Using wire cutters, cut an idea-ology metal gate in half. I freaking love these metal gates and bought up quite a few to hoard and use throughout the year. Alter with picket fence distress paint and mushroom alcohol ink and adhere with distress collage medium to the inside edges of the vignette frame. Add idea-ology bouquet findings flowers, dyed with distress markers and stems painted with distress paint. Add an idea-ology adornment halloween spider to a broomstick and adhere to the frame. These spiders are so creepy I can barely touch them, (tweezers)!

    iGirlZoe: Tim Holtz, etcetera tombstone overlay, 3D lumber texture fades, idea-ology, sizzix, stampers anonymous, ranger ink, mixed media, halloween, witches, skulls, paper dolls
    Alter an idea-ology story stick with mushroom alcohol ink and rusty hinge distress paint and add to the frame. Die cut ivy from classic kraft stock using the garden greens thinlits die and adhere around the frame and to the top overlay. This is an older Tim Holtz die, but I just love how the older products work so brilliantly with the new ones.

    iGirlZoe: Tim Holtz, etcetera tombstone overlay, 3D lumber texture fades, idea-ology, sizzix, stampers anonymous, ranger ink, mixed media, halloween, witches, skulls, paper dolls
    Add the more of the die cut letters to the bottom portion of the overlay. I used “Est 1502” in place of where a death date would go to show when these naughty witches established their “Wicked & Co” boutique. If you would like to see what they’re selling in there, keep an eye on my blog…

    iGirlZoe: Tim Holtz, etcetera tombstone overlay, 3D lumber texture fades, idea-ology, sizzix, stampers anonymous, ranger ink, mixed media, halloween, witches, skulls, paper dolls
    I hope you have enjoyed this idea-ology and etcetera tombstone overlay tag tutorial and it has inspired you to get creative. These products are seasonal and available in limited quantities, (one and done), so don’t delay in picking them up from your local or online retailer.

    The 2018 Tim Holtz Halloween release is a gothic wonder, so a huge shout out and thank you to Tim Holtz, Mario Rossi and Paula Cheney who collaborate to bring us these amazing products to craft with.

    Thanks for stopping by.

    Zoe

     



  10. Sinister

    2nd October, 2018 by iGirlZoe

    Hello friends. It’s a couple of weeks since my last post and I’ve been busy cooking up some things in my cauldron. While waiting for a project to dry, I made this quick card to send to a friend for Halloween.

    iGirlZoe: Tim Holtz, funky foliage thinlit dies, sinister bigz die, idea-ology, design tape, sizzix, stampers anonymous, ranger ink, mixed media, ornate and lace, halloween, skull, fall, leaves
    I LOVE the new Sizzix Sinister Bigz die by Tim Holtz! I was a smitten kitten when it was launched on Tim Holtz’s facebook live, and it does not disappoint.

    iGirlZoe: Tim Holtz, funky foliage thinlit dies, sinister bigz die, idea-ology, design tape, sizzix, stampers anonymous, ranger ink, mixed media, ornate and lace, halloween, skull, fall, leaves
    I dragged distress mixed media heavystock through hickory smoke and frayed burlap distress spray. Die cut with the sinister bigz die and blended in walnut stain distress ink to the edges of the die cut. The die cut was mounted onto the card backing with 3D adhesive foam to give some dimension.

    iGirlZoe: Tim Holtz, funky foliage thinlit dies, sinister bigz die, idea-ology, design tape, sizzix, stampers anonymous, ranger ink, mixed media, ornate and lace, halloween, skull, fall, leaves
    The backing mounts are Kraft card, black classic kraft stock sanded with the sanding grip and blended with vintage photo distress ink, scrap paper covered with halloween design tape. The background under the skull is heavystock stamped with the lace stamp from the Tim Holtz ornate and lace set with a frame embossed with the 3D lumber texture fades, adhered over the top.

    iGirlZoe: Tim Holtz, funky foliage thinlit dies, sinister bigz die, idea-ology, design tape, sizzix, stampers anonymous, ranger ink, mixed media, ornate and lace, halloween, skull, fall, leaves
    I loved his gold tooth on the packaging image, so had to include one myself. I covered with a dab of distress collage medium and dipped into gold embossing powder and melted.

    iGirlZoe: Tim Holtz, funky foliage thinlit dies, sinister bigz die, idea-ology, design tape, sizzix, stampers anonymous, ranger ink, mixed media, ornate and lace, halloween, skull, fall, leaves
    I die cut several pieces of foliage from the funky foliage thinlits set. Including some teeny wood grain leaves from a piece of 3D lumber embossed heavystock. I added a piece of mummy cloth, sprayed with rusty hinge distress spray. I covered an idea-ology halloween quote token with picket fence distress crayon.

    iGirlZoe: Tim Holtz, funky foliage thinlit dies, sinister bigz die, idea-ology, design tape, sizzix, stampers anonymous, ranger ink, mixed media, ornate and lace, halloween, skull, fall, leaves
    Thanks for stopping. I will be back this week with my first idea-ology seasonal project and it’s quite wicked…
    Zoe